CASE STUDY 1

CLIENT SPECIFICATION:
To construct a revised layout by lifting existing sidings and re-using all
materials recovered.

PROBLEMS ENCOUNTERED:
To meet the final design criteria, a substantial volume of additional bullhead check
rail and check chairs was required – more than that recoverable from site, or in the market place within the contract programme.

The problem was solved by the in-house manufacture of pressed steel base plates
as an alternative to check chairs. This allowed the use of flat bottom rail available
from A.L.A. stock. We agreed a “like for like” exchange of rail, and therefore there
was no cost implication on the contract.

The Difference –
Speed and a Tailored Service from In-House Manufacturing.

CASE STUDY 1 | CASE STUDY 2 | CASE STUDY 3